Equipment that is very important and the most reliable to provide a cooler and cooler room, one of which is AC because this air conditioner is often used when the weather feels hot and is the right solution to cool the room quickly and easily and the installation of air conditioning can also improve air quality and the use of air conditioning can provide comfort for the body to carry out daily productivity as needed then the air temperature can be adjusted as desired.

AC is a system designed to stabilize temperature and humidity in a certain area by attracting hot air from outside then the condensation process occurs which can produce cold air and spread evenly with a unit that blows cold air, However, it is often encountered about the problem of air conditioning that suddenly does not release cold temperatures which causes the room to become hotter, therefore if you experience AC not cold it is necessary to know the cause. Here are some causes of AC not cold that need to be considered, including:

Dirty AC Filter

The many diverse components are arranged in the electronics of an AC where these components have their own functions and the need to clean and maintain them regularly and ensure all components run properly without problems, the main thing that should not be missed to clean it is about the AC filter because this AC filter serves to filter dust and dirt and incoming air which over time will clump which has the potential to clog the filter and block cold air from escaping then the air produced from the AC feels hot, therefore it is very important to clean the filter so that the air conditioner functions properly and produces cooler air.

Freon AC Runs Out

Freon is an important gas for the cooling process in a room, if the Freon runs out or leaks it can cause the AC not to cool because Freon also has a service life that can be problematic, therefore the need to check and fill the AC Freon as needed because if the Freon is insufficient, the ability of the AC to cool in a room will decrease.

The Size of the Air Conditioner Does Not Match the Capacity of the Room Area

The area of the room is also one of the causes of the air conditioner not being cold, in addition to technical problems, the area of the room greatly affects the size of the air conditioner because the small size of the air conditioner cannot provide bursts of cold air and cannot work more optimally, therefore take measurements of the room first before buying an air conditioner with the appropriate size so that the room does not feel hot, and the capacity of the AC unit is appropriate so that the resulting cold temperature will be felt throughout the room so that the air conditioner will function optimally.

Open Doors and Windows

The problem of AC not cold does not always come from the machine or AC unit, but leaving the door and window open will affect the temperature of the room feels not cold because this unwittingly often happens to homeowners, therefore make sure first the doors and windows are tightly closed to increase energy efficiency and maximum cooling effectiveness.

Broken AC Remote

Sometimes the AC remote does not function properly which cannot send a temperature change signal to the AC unit, therefore the need to buy a new AC remote then in terms of setting the AC remote is also very influential on cold temperatures, therefore remote settings are very important to activate the mode you want to use such as cool mode so that the AC is cold, Fan mode so that the room gets a more even flow of cold air.

Dirty Condenser

The components on this condenser are very important to deliver cold air, one of the causes of the air conditioner does not produce cold air is because the condenser is dirty so that it reduces cooling performance and the air cooling process is not optimal, where this condenser is located on the outside of the air conditioner which functions to heat refrigerant gas at a certain temperature therefore, the condenser coil must be cleaned regularly to remove heat from outside, if the condenser is dirty AC becomes less efficient which cannot perform its function more optimally and results in the cooling process being hampered and not maximal even does not emit cold temperatures, cleaning all the dirt on the condenser appropriately can provide good airflow.

Broken Thermostat

Damage that occurs in the temperature of the thermostat which results in the function of the air conditioner is not cold and abnormal because this thermostat is a sensor that detects room temperature that gives instructions to the compressor, if the thermostat does not work it will cause the AC unit not to run efficiently, it is necessary to change the thermostat as needed so that the temperature control can be controlled accurately.

Hot Room Conditions

Having room conditions that are easily hot or the temperature easily rises can be the cause of the air conditioner not having a cold temperature, this can be affected by several factors such as large glass windows and the sun can penetrate the glass, residential walls made of a mixture of sand and cement that can absorb heat easily so that the air conditioner does not feel cold because the room temperature is always hot.

Clogged Air Vents

Clogged air flow makes the air filter that is used for air circulation to inhibit the distribution of cold air into the room, blocked air circulation usually has dirt such as dust, pet hair and other impurities. Check air vents regularly to keep them clean so that it can overcome ventilation problems then the air conditioner can function properly and ensure the air flow of the air conditioner is not blocked by furniture, curtains and other objects that block ventilation in the air conditioner.

Electrical Problems

Unstable electrical problems can affect AC performance such as capacity problems, damaged cables, compressor failure, having loose plugs can also affect the flow of electricity to the air conditioner so it does not produce cold air effectively. If the air conditioning problem persists, it is recommended to contact an experienced HVAC technician to diagnose and resolve electrical problems for further examination with the AC system.

Conclusion

AC is a machine that must be given regular maintenance because it is an important step to maintain AC performance, then for installation to be done appropriately and in accordance with the size of the room in order to produce cool cold temperatures and evenly distributed throughout the family, timely repair is highly recommended to prevent AC cooling problems, however, it should be noted about electrical stability because unstable electrical voltage can cause problems with the AC system, then ensure the AC operates efficiently so that it can provide a comfortable temperature as desired and the AC functions more optimally.